\n
XR glasses like the Viture Beast have been around for a few years now, but I always saw them as kind of a gimmick. Back when the original Legion Go handheld came out, I tried Lenovo\u2019s first try at the Legion Glasses, and while they were definitely neat, they were fiddly and just ended up giving me a headache. But a lot has changed in the last few years. <\/p>\n
The Viture Beast XR glasses deliver the feeling of a gaming headset, but for your eyes. The 1200p combined display looks crisp, and the speakers embedded in the stems, or temples, are good enough that I don\u2019t feel the need to dig out headphones to wear awkwardly on top of them. <\/p>\n
But more than anything, these glasses are actually comfortable to wear for more than 10 minutes, which is huge in a world where handheld gaming has blown up as much as it has. Because no matter how good the built-in displays on the Legion Go 2 or the Switch 2 are, nothing quite beats laying back and playing your games on a giant TV that your brain\u2019s been tricked into thinking is on your ceiling. <\/p>\n\n\nPurchasing Guide<\/h2>\n The Viture Beast XR glasses are available now on Viture’s website for $549. That’ll get you the glasses and a carrying case. But if you want the mobile dock that’ll let it work with the Nintendo Switch 2, that’ll cost you an extra $99.<\/p>\n<\/aside>\n<\/section>\n
<\/p>\n\n
Viture Beast XR Glasses \u2013 Hands-On Photos<\/h3>\n<\/span><\/output><\/p>\n
What Even Are XR Glasses?<\/h2>\n If you\u2019re not already a handheld gaming sicko, it\u2019s very likely that you\u2019ve never even heard of XR glasses before. Basically, these are glasses with little displays embedded behind each lens, which project a display right in front of your eyes. And because there are two displays so close to your eyes, these glasses essentially trick you into thinking you\u2019re looking at a much larger display than you are. <\/p>\n
To be clear, nothing is actually running on these XR glasses. Instead, think of these as a monitor that you can strap to your face, and connect to whichever device you want to use \u2013 as long as it supports USB-C display output. <\/p>\n
Right off the bat, that means all kinds of devices can use this to expand screen real estate. You can plug it into your phone, a tablet, or even that 14-inch work laptop you\u2019re hunched over all day. All of these devices would benefit from a larger display, and Viture claims the Beast glasses simulate a 174-inch screen on its highest setting. And while I can\u2019t exactly break out a tape measure to check that, it feels <\/em>accurate. <\/p>\n<\/p>\n<\/output><\/p>\n
But the biggest benefit I\u2019ve found for the Viture Beast and other XR glasses has been plugging them into a handheld gaming PC like the Xbox Ally X, especially while traveling. Because, for all the progress that handhelds have made in being comfortable to use over long periods of time, they can still really start to weigh you down, especially during a long flight. With these glasses, though, you can lay your head back and play your games on a giant screen, while just holding your device in your lap.<\/p>\n
Even at home, because I don\u2019t have a lot of space for large TVs, I\u2019ve been using these glasses to watch TV or play games on the Xbox Ally X without having to stare at its small 7-inch screen for hours at a time. So while it does still feel like we\u2019re in the early days of XR glasses being a thing, they are only getting more sophisticated over time, and I can see them becoming ubiquitous, especially as portable gaming gets more and more popular. <\/p>\n
<\/p>\n<\/output><\/p>\n
Design and Features<\/h2>\n Right out of the box, Viture\u2019s The Beast glasses look like particularly thick sunglasses. Because of the displays behind each lens, they by necessity need to stick out a bit from your face. I\u2019m sure there\u2019s some way to solve this sometime, but for right now, this makes them look quite dorky. <\/p>\n
Even the temples, or stems, of the glasses are quite thick, due to the speakers and all the little buttons worked into each of them. So, while Viture was clearly going for an unassuming aesthetic, it still looks<\/em> like you\u2019re wearing a device on your face. But, I don\u2019t think that\u2019s necessarily a bad thing, especially if you\u2019re just looking for something to use at home or on the plane. <\/p>\nThe front of the glasses has Viture\u2019s \u2018V\u2019 logo in the top right corner, along with a camera in between the two lenses. Eventually, Viture claims this camera will be used for spatial computing features, but right now it\u2019s mostly used to help track head movement, so that the display follows your gaze. Luckily, there’s a little sticker sheet of camera covers, and you don\u2019t really lose much by covering it up if having a face-mounted camera makes you uncomfortable.<\/p>\n
On the top of each lens is a shroud that partially houses the display behind each lens. This is where each display is actually housed, and it tends to get quite warm while you\u2019re using them. That hasn\u2019t been a problem for me yet, but I expect that using The Beast during a hot summer\u2019s day is going to be miserable. <\/em>Luckily, airplanes get quite cold, so that should balance out. <\/p>\nBelow this shroud is the nosepad, and luckily, it\u2019s interchangeable. The Beast comes with three different options, each for a different size of nose. The goal is to get the glasses to sit as close to your eyes as possible, so that the displays are clear. A lot of times, I\u2019ve noticed that if the glasses slide down my nose, the display will get blurry, which can be a bit headache-inducing. <\/p>\n
A lot of that comes down to how the glasses work. The two humps at the top of the glasses house the actual display, which use mirrors to project the display down to each of your eyes. This has the effect of making it look like you\u2019re looking at one giant monitor, instead of two projections of a display. But, the effect lessens the further you are from the prism display. <\/p>\n
On the bottom of each of the temples are two buttons, a long button that looks like a volume rocker on any other device, and a short button. By default, the long button on the right controls transparency: turn it all the way down, and you\u2019ll easily be able to make out your environment, making it look like a giant TV is just floating in the room around you. <\/p>\n
I prefer to keep this setting turned all the way up, which completely blacks out the area around the projected display, especially when I\u2019m playing games. <\/p>\n
The short button on the right side changes the anchor mode of the glasses. You can toggle between a no-depth-of-field option, an anchored option that\u2019ll make the display look like it\u2019s staying in one spot, and a \u2018Smooth Follow\u2019 that\u2019ll have the display sit in the center of your field of view when you move your head. The latter of these anchor modes is why the little camera on the front of the glasses is necessary, as it helps track your head\u2019s movements to keep things stable. <\/p>\n
Over on the left hand side, the long button adjusts the display brightness. It would have made a lot of sense for Viture to have this rocker adjust volume by default \u2013 instead, you have to do a short press on the button in front in order to bring up a volume meter that you can then adjust. <\/p>\n
Each of the buttons also does something different when you long-press them, which makes for a dizzying amount of button combinations to memorize. Luckily, when you first plug The Beast glasses in, you\u2019ll be walked through a tutorial that\u2019ll tell you how to use each of the buttons \u2013 and it\u2019s even repeatable. <\/p>\n
On the far end of each of the temples are directional speakers that Viture says were co-engineered with Harman Kardon. I\u2019ll admit that I went into this expecting these speakers to be awful<\/em> considering the amount of space they have to work with, but they sound awesome. Even when I\u2019m grinding away in Diablo 4, I can make out all the little sounds of demons perishing to my 10th Sorcerer in three years. <\/p>\nThe USB-C cable that connects Viture\u2019s The Beast to whatever device you want to use them with, plugs in on the back of the right temple. Luckily, Viture includes an angled connector, which naturally drapes the cable over your ear, rather than a standard USB-C cable which would jut straight backwards. <\/p>\n
My only problem with this cable is the length. When I first started using these glasses I had a vision<\/em> of plugging them into a gaming laptop on my nightstand and then playing Assassin\u2019s Creed Shadows maxed out while lying in bed and looking at the ceiling. But, with this short cable that\u2019s impossible unless I want to smother a rapidly heating gaming laptop in a mass of blankets. <\/p>\nHowever, this is a problem that\u2019s solved simply by grabbing a longer cable off of the shelf, so it\u2019s not that big of a deal. Just something to keep in mind. <\/p>\n
<\/p>\n<\/output><\/p>\n
Performance<\/h2>\n I haven\u2019t used a ton of XR glasses in the past \u2013 after all, they\u2019re a pretty new category \u2013 but the Viture Beast is probably the best pair I\u2019ve used so far. Text is mostly readable and the display gets bright and colorful enough that I don\u2019t find myself longing for my monitor after a few minutes. <\/p>\n
They\u2019re not perfect, though. There have been a few times where I\u2019m playing a game, and any text that\u2019s on the edges of the display starts to get blurry. Admittedly, this is only really a problem for me, because I\u2019m a hardware sicko that needs to look at a performance overlay at all times when I\u2019m playing games. But there were times when I was playing Vampire Crawlers where the already pixelated text in the corners of the screen was a bit blurry, and it started to give me a headache. <\/p>\n
I can\u2019t help but wonder if the blurriness is due to the resolution. A 1200p resolution is fine for a smaller display, but stretched out across a giant TV, text is going to start getting blurry. But, then again the actual display size is quite small, so it could just be down to my narrow IPD (interpupillary distance). <\/p>\n
Viture also claims that the Beast glasses feature up to 108% of the Adobe RGB color gamut and peak \u2018perceived\u2019 brightness of 1,250 nits. This is something I\u2019d typically measure on a standard gaming monitor with a colorimeter, but that\u2019s not really an option here. I will say, though, that the display does seem to get plenty bright and colorful for watching movies or playing games. But I wouldn\u2019t necessarily recommend them for any kind of creative work. <\/p>\n
However bright the glasses do actually get, they do work hard to get there. After using them for a while the top of the glasses gets shockingly warm to the touch. It\u2019s not enough to burn you, and Viture has found a way to make it so that you don\u2019t feel the heat when you\u2019re actually wearing them, but it definitely surprised me when I first took them off after an extended play session. <\/p>\n
I said at the top that XR glasses are like \u2018gaming headsets but for your eyes.\u2019 For short play sessions, the comparison rings true. But while a good headset can be comfortable for hours on end, XR glasses aren\u2019t quite there yet, but I can see them getting there soon<\/em>. In the meantime, the Viture Beast XR glasses are a great way to kick back on a flight and play games on a handheld without having to hold up a bulky device the entire way.<\/p>\nJackie Thomas is the Hardware and Buying Guides Editor at IGN and the PC components queen. You can follow her <\/em>@Jackiecobra<\/em><\/a><\/p>\n<\/div>\n